

This a DIY kit, you need to have some knowledges of electronics and ability!!!
This product is excellent for remote, experiments, alarms and automatic data collection.
You can use with Microcontroller like Arduino or USB to serial adapter and send command directly from a computer.
Voltage : 5V
Frequency: 900/1800MHZ
Stand by current <10mA
Working current <80mA
Working Temperature: -30°C to 80°C
Baud: 9600 or change by sending AT+IPR=xxxx
Interface: TTL
Commands: Regular AT commands
Connectors: 5V/GND/TxD/RxD
Function: Send and receive SMS messages and GPRS date.
Witty PI2 adds RTC (DS3231SN) and power management to you Raspberry PI, and define complex ON/OFF sequence with simple script.
The LEAPER-56 is a pocket size universal programmer. It provides with 75MHz bandwidth and < ±2.5nS signal skew just in smart-phone size. The programming efficiency is much better than the other programmers on the market in any time and any condition.
By letting your PC or laptop connect with LEAPER-56, it will perform your outstanding ability of development and debugging. You can easily have professional factory-level productivity.